This little unit has the same functions as the standard MD Cycle Control box but instead of running five wires through and out of your handlebar there is only one wire that comes out and goes to the module which is hidden somewhere on the bike! There is no way to get a cleaner look. Detailed instructions included.

download pdf

RSD Frame and Rigid Frames for Sportsters

Good frames for perfect bikes.
To build a good custom bike the first and most important choice is which frame to use.
With years of experience and skilled welders Penz Custombikes creates some of the best frames available. The customer can choose between Sportster, Evo and Twin Cam engines. Penz Custombikes produces all frames on a precision frame jig out of St 52 grade steel which is WIG welded. The key to a good custom bike is the frame, their successes at shows and many bikes on the road are there to prove it.

Right Side Drive Lowrider Frame
Tire size up to 300, rake 42 degrees, downtube stretch -2, backbone stretch +4, delivered with oiltank and fenderstruts, 1“ rear axle.

• 683757    Evo style driveline
• 683758    Twin Cam B driveline up to 06
• 683759    Twin Cam B driveline 07up

See Spring Update, page 60

Here we offer you a range of special silencers. The slip on inside diameter is about 1 3/4” (45mm).

• 684499    “Super Disc 225”
• 684498    “Super Disc 180”

See Spring Update, page 59

The coolest way ever to start your shovel. Turn the ignition on and pull the beefy lever! Relay sold seperately.

• 683449    Raw finish

See Spring Update, page 57

Precisely machined from high grade aluminum, this gascap set will complete that custom look on your bike with the classic maltese cross design.

• 683447    Fits 83-95 HD screw in type bungs

See Spring Update, page 57

The PM Contour Belt Drive Primary has several key features that make it superior to other belt drives. The motor plate and lock up clutch are designed to tolerate the power of big motors. Clutch action at the lever is eased by use of lower rate springs, while the inertia activated lock up feature keeps things from slipping when the power is poured on. Completely replaces the stock primary and utilizes a narrow belt for lightweight, better cornering clearance and does not interfere with access to forward controls.
Designed to integrate seemlessly with PM Mid Mount Controls. Will fit all 1991 through 2009 HD Softails, Dynas and many customs. Does not fit FLH or FXR models. Dyna models must use forward controls or the integrated PM mid Mounts on page 35. The Primary is available in chrome and Contrast Cut finishes. The Contrast Cut finish features a blacked out primary integrated with machined Contrast Cut covers and the same quality internals.

• 684381    Fits 91-06 Softail and 91-05 Dyna models, contrast cut
• 684382    Fits 91-06 Softail and 91-05 Dyna models, chrome
• 684383    Fits 07-09 Softail and 06-09 Dyna models, contrast cut
• 684384    Fits  07-09 Softail and 06-09 Dyna models, chrome

See Spring Update, page 56

Single or dual, this is the very best front brake set up for the 99 and earlier front end! Caliper bolts directly to fork. Order 1 left caliper for single disc and 1 right and 1 left for dual discs.
Left side caliper

• 684254    For 11,5” brake rotors, contrast cut
• 684255    For 11,5” brake rotors, chrome

Right side caliper

• 684256    For 11,5” brake rotors, contrast cut
• 684257    For 11,5” brake rotors, chrome

See more at Spring Update, page 53

Late model Softails are now sporting a 200mm wide rear tire on a 17” rim. To fit all that wheel in the standard size swingarm, HD changed out the brake system. PM has taken it one step further and created a rear brake that replaces the OEM unit, looks better and stops faster!
This system is designed specifically for the 2006-07 and newer Softails that come stock with a 200mm tire. 2006-07 Models that still come with a 150mm tire will use the PM system below. Except 2008-09 may use this system with both the 200mm and 150mm tire size. May have to remove rotor when installing on a stock wheel.
For models 2006-07

• 684440    Integrated caliper/bracket for Softail models, contrast cut
• 684441    Integrated caliper/bracket for Softail models, chrome

For models 2008-09

• 684408    Integrated caliper/bracket for Softail models, contrast cut
• 684409    Integrated caliper/bracket for Softail models, chrome

See Spring Update, page 48

See Spring Update, page 45

by American Micro-Fuel Device Corp. (AMFD)

RideMaxx™ leads the EFI Control Industry with its wireless handlebar controlled EFI Tuner. RiderMaxx™ is comprised of two units – the wireless RideTuner handlebar mount, and the wireless FuelMaxx ECU module. The RiderTuner mounts directly on to your handlebar and enables you to select from three separate modes-Power, Economy, or Auto. The RideMaxx™ unit takes only a few minutes to install. It plugs directly into the ECU, and talks wirelessly to the RiderTuner. It’s that simple – two maps, three settings, all your choice. Used only on Delphi® EFI equiped models. Made in USA.
- Comes pre-programmed for true plug-and-play installation
- RideTuner Handlebar mount includes pre-set Power, Economy, and
   Auto settings
- Works with any air filter and exhaust
- Full Map database included with software CD for PC’s, and available on
   www.americanmicrofuel.com
- Bluetooth enabled for full wireless tuning capabilities
- Offers full range of rich and lean fuel adjustment
- Eliminates backfiring, pinging, popping on deceleration
- Up to 15% increase in Horsepower
- Up to an added 3 – 6 miles to the gallon (15 – 30 miles per tank)
- Includes FuelMaxx, RideTuner, Software, Battery, and Installation
   tools

• 640200    Fits Twin Cam® Touring models 2002 thru 2006
                    open loop system  with no O2 sensors and
                    36 pin ECU plug
• 640201    Fits Twin Cam® Softail® models 2001 thru 2006
                    open loop systems, with no O2 sensors and
                    36 pin ECU plug
• 640202    Fits Twin Cam® Touring models 2007 only, close
                    loop system with O2 sensors and 36 pin ECU
                    plug
• 640203    Fits Twin Cam® Softail® models 2007 to present
                    close loop system with O2 sensors and 36 pin ECU
                    plug
• 640204    Fits Twin Cam® Touring models 2008 to present
                    close loop system with O2 sensors and 73 pin ECU
                    plug

See Spring Update, page 39

by American Micro-Fuel Device Corp. (AMFD)

With a few more up-graded features the RideMaxx™ Plus really lets you feel the power of what your bike can do. Made in USA.
- New RideMaxx Plus features fuel accelerator pump
- Fuel accelerator delivers extra fuel to match the engine’s needs
  during quick throttle movements
- Fuel accelerator pump delivers a considerably snappier throttle
  response
- Software for most portable Bluetooth enabled devices included
- Wireless and Cable free for 5 minute installation
- Comes pre-programmed for true plug-and-play installation
- RideTuner Handlebar mount includes pre-set Power, Economy, and
  Auto settings
- Works with any air filter and exhaust
- Full Map database included with software CD for Windows PC’s and
  most Bluetooth enable handhelds, Windows PC Software is available
  on www.americanmicrofuel.com
- Bluetooth enabled for full wireless tuning capabilities
- Offers full range of rich and lean fuel adjustment
- Eliminates backfiring, pinging, popping on deceleration
- Up to 15% increase in Horsepower
- Up to an added 3 – 6 miles to the gallon (15 – 30 miles per tank)
- Includes FuelMaxx, RideTuner, Software, and Battery

• 640210    Fits Twin Cam® Touring models from 2002 thru 2006
                    open loop system  with no O2 sensors and 36 pin ECU
                    plug
• 640211    Fits Twin Cam® Softail® models from 2001 thru 2006
                    open loop systems. with no O2 sensors and 36 pin ECU
                    plug
• 640212    Fits Twin Cam® Touring models 2007 only, close loop
                     system with O2 sensors and 36 pin ECU plug
• 640213    Fits Twin Cam® Softail® models from 2007 to present
                    close loop system with O2 sensors and 36 pin ECU
                    plug
• 640214    Fits Twin Cam® Touring models from 2008 to present
                    close loop system with O2 sensors and 73 pin ECU
                    plug

See Spring Update, page 39

3D milled aluminium custom air cleaner, black anodized with polished ornament! Available in two designs TÜV and non TÜV approved. Sold each. Non TÜV approved versions need adjustments in jet sizes of carburetors or re-mapping of EFI systems.
TÜV approved aircleaners

• 683797    Aircleaner “Open Mind” for EVO models with TÜV
• 683798    Aircleaner “Open Mind” for Twin Cam models with TÜV
• 683854    Aircleaner “Cross” for EVO models with TÜV
• 683855    Aircleaner “Cross” for Twin Cam models with TÜV

Aircleaners without approval

• 683856    Aircleaner “Cross” for EVO models
• 683857    Aircleaner “Cross” for Twin Cam models
• 683799    Aircleaner “Open Mind” for EVO models
• 683800    Aircleaner “Open Mind” for Twin Cam models

See Spring Update, page 38

The MoFlow air cleaner assembly is made from aluminum, polished and chrome plated. Hidden fasteners and internal breather tube make for a clean look. Each air cleaner assembly contains a reusable pleated gauze performance filter that has been engineered and flow tested to obtain maximum flow and protection for your motor. Seal breather assembly velocity plate and all necessary mounting hardware included. Adapter for Mikuni carbs sold separately.  Available in Chrome or Wrinkle Black Powder Coated.

black wrinkle

• 684113    93-99 Big Twins with CV carburetor or Delphi, black
                    wrinkle
• 684116    99-09 Twin Cam, black wrinkle
• 684125    99-07 BT, Twin Cam with S&S carburetor, black wrinkle
• 684119    89-09 XL with CV, Delphi or Mikuni, black wrinkle
• 684128    89-07 XL with S & S Super E or G, black wrinkle
• 684122    93-99 EVO BT W/ S&S super E or G, black wrinkle
• 684131    08-09 FLH‘s, black wrinkle

chrome

• 684112    93-99 Big Twins with CV carburetor or Delphi, chrome
• 684115    99-09 Twin Cam, chrome
• 684124    99-07 BT,  Twin Cam with S&S carburetor, chrome
• 684118    89-09 XL with CV, Delphi or Mikuni, chrome
• 684127    89-07 XL with S & S Super E or G, chrome
• 684121    93-99 EVO BT W/ S&S super E or G, chrome
• 684130    08-09 FLH‘s, chrome

gloss black

• 684114    93-99 Big Twins with CV carburetor or Delphi,
                    gloss black
• 684117    99-09 Twin Cam, gloss black
• 684126    99-07 BT, Twin Cam with S&S carburetor, gloss black
• 684120    89-09 XL with CV, Delphi or Mikuni, gloss black
• 684129    89-07 XL with S & S Super E or G, gloss black
• 684123    93-99 EVO BT W/ S&S super E or G, gloss black
• 684132    08-09 FLH‘s, gloss black

See Spring Update, page 38

Comes complete with RR axle, nut and adjusters, caliper bracket, shock spacers and TÜV papers. Up to 240mm tires.

• 683456    For Dyna models ´00-´06
• 683457    For Dyna models ´06 up

See Spring Update, page 37

Paul`s new twist on the flush-mount axle. A great accent to your fork and a perfect way to lose that big clunky thing your bike came with. Available in 3 finishes: Smooth chrome, Domino chrome or anodized black machined Domino. 3/4” / 1” or 25mm axle sizes available to fit all models thru 2008!

• 603040    3/4” Black Domino Cap fits touring models 1986-1999
• 603041    3/4” Chrome Domino Cap fits touring models 1986-1999
• 603042    3/4” Smooth Chrome Cap fits touring models 1986-1999
• 603043    1” Black Domino Cap fits touring models 2000-2007
• 603044    1” Chrome Domino Cap fits touring models 2000-2007
• 603045    1” Smooth Chrome Cap fits touring models 2000-2007
• 603046    25mm Black Domino Cap fits touring models 2008
• 603047    25mm Chrome Domino Cap fits touring models 2008
• 603048    25mm Smooth Chrome Cap fits touring models 2008

See Spring Update, page 35

CYRON has developed an automatic lighting system that is useful, effective and inexpensive. Available with either 1 or 2 lights. As an example, use the 2 light kit for both bags and the 1 light kit for a tour pack. Or double up for each application for even more lighting. Kits include everything for an easy self powered installation. Size: 2” x 1” x ¾” each unit. Uses AG13 type batteries included. Sold each

• 608222    Automatic Light Kit with 2 lights
• 608223    Automatic Light Kit with 1 light

See Spring Update, page 33

SINGLE-LED (13 watt) turn signal PEN HEAD, black aluminium housing, E-marked,
Head dimensions l/w/d: 34x22,5x20mm
Stem length: 14,5mm, M8 bolt

• 683625    Black, sold in pairs

See Spring Update, page 32

These sturdy sidemount license plate brackets from CPV are machined from finest quality aluminum and are available with two different styles of EC approved taillights. They come in polished or black anodized finish. Also available for Rocker models.

• 681434    Mini Led polished fits all Evo Softail models
• 681435    Mini Led black fits all Evo Softail models
• 681436    Shark Nose polished fits all Evo Softail models
• 681437    Shark Nose black fits all Evo Softail models
• 681438    Mini Led polished fits all Twin Cam Softail models
• 681439    Mini Led black fits all Twin Cam Softail models
• 681440    Shark Nose polished fits all Twin Cam Softail models
• 681441    Shark Nose black fits all Twin Cam Softail models
• 681442    Mini Led polished fits all Rocker Softail models
• 681443    Mini Led black fits all Rocker Softail models
• 681444    Shark Nose polished fits all Rocker Softail models
• 681445    Shark Nose black fits all Rocker Softail models

See Spring Update, page 31

These slick, chrome-plated LED Circular Bag Lites come with a special feature available nowhere else - a run-turn-brake controller (which only controls these lights) that illuminates the turn mode amber and the run and brake function in red.
Complete with gasket and simple plug-in wiring. Fits 96 & Up 8-pin connector.  If you are eliminating your rear stock turn signals and using the Bag Lites as your only rear turn signals, and your bike is equipped with a factory alarm, you will need to purchase separately a load equalizer.
NO painting required! With wiring modifications, Bag Lites can be mounted onto any flat surface. Works on Road King Classic leather bags all fiberglass bags.

• 683984    Bag Lites  (2 lite set)
• 683985    Bag Lites  (2 lite set)-BLACK
• 683986    Bag Lites (4 lite set)
• 683987    Bag Lites (4 lite set)-BLACK

See Spring Update, page 28

This E-approved taillight with clear glass lens is available in black and chrome. Dimensions w/h/d: 74x64x20,5mm
Distance between the mounting hole: 40mm
(Supplied with 2 M4 screws)

• 683621    Black
• 683622    Chromed

See Spring Update, page 27

Universal mirror, oval head, head dimensions: 125x62mm. Available with adjustable stem or as handlebar clamp on mirror.
Mirror with Adjustable Stem:
Stem length: 150mm up to hinge, 30mm up to the thread bolt.  Supplied with one extra adapter M10 with
L/Hand thread.

• 683636    Chrome, adjustable stem
• 683637    Black, adjustable stem

See Spring Update, page 22

Made of aluminium without endcaps. Endcaps are available separately in four different designs.

• 683785    Base Grip Set Black Anodized

See Spring Update, page 18

Style your Base pegs or grips with these popular end cap styles.

• 683786    Cover “Cross”, aluminum anodized
• 683787    Cover “Open Mind”, aluminum anodized
• 683788    Cover “RS”, aluminum anodized
• 683789    Cover “Fun Ride”, brass

See Spring Update, page 18

Made of aluminium in black anodized version. Peg endcaps are not included and sold separately.

• 683790    For Dyna models, black
• 683791    For V- Rod models, black
• 683792    For EVO models, black
• 683793    For Twin Cam models -06, black
• 683851    For Twin Cam / Rocker models 07-up, black incl.
                    kickstand

See Spring Update, page 18

The 11/16” Contour master cylinder integrates racing technology in both the push rod and piston for less effort at the pedal. Contour Forward Controls are designed to work with PM Brake Systems as well as OEM and other aftermarket brakes. Now available for both stock kickstands and customs that use frame mounted kickstand (Left side does not have bracket or mounting holes for OEM style kickstand) for a clean smooth look.
Brake Pedal Assembly: Forward mount brake pedal is manufactured from billet aluminum with stainless steel shaft for strength and long life. The brake pedal is mounted forward of the foot pedal for ease of use and is fully adjustable. Arms ride on Teflon bearings for a perfectly smooth, corrosion free operation.
Shift Pedal Assembly: Manufactured from billet aluminum and stainless steel. The shift lever is fully adjustable, rides on Teflon bearings and utilizes the stock HD kickstand and return
Foot Pegs: The Round style and original Contour foot pegs are uniquely designed for comfort and style. The new easy to replace rubber inserts provide a non-slip surface and protect the pegs. The pivot is completely redesigned and is now polished stainless steel.
Foot Pedals: The rubber inserts and rubber wrapped pedals provide a non slip surface and protect the pedals. The brake side pedal is mounted forward of the foot peg for immediate braking response without lifting your foot from the foot peg and is fully adjustable.
Master Cylinder: The Contour master cylinder is designed to match our handlebar controls and features an 11/16”piston for the ultimate in braking power and feel.

Contour forward control kits for Softail models from 1984 to 1999

• 684201    With Contour pegs & pedals (pictured), contrast cut
• 684202    With Contour pegs & pedals (pictured), chrome
• 684217    With round pegs & pedals, contrast cut
• 684218    With round pegs & pedals, chrome

See much more at Spring Update, page 16

Protect your paint from accidents while working or storing your bike. These high quality neoprene covers are form-fitted to your tank or fender size. The Saddle bag cover is only for fiberglass bags. Made from 4mil Neoprene wet suit material with or without pockets on the tanks. Perfect for storing bolts from h-bars while assembling.

• 683951    5.2 Fatboy Tank Cover
• 683952    3.2 Sporty Tank Cover
• 683953    5.2 Fatboy Tank Cover with pockets
• 683954    3.2 Sporty Tank Cover with pockets
• 683955    Heritage or Dressers Fender Cover
• 683956    Fat Boy Fender Cover
• 683957    Softail Custom/Sporty Fender Cover
• 683958    Mechanics Set
• 683959    Saddle Bag slip over cover set (Road King & Baggers)

See Spring Update, page 13

Old School attitude sticks are made from 9/16 round steel bar. Maltese, Dagger and Spade styles are made from 9/16 square steel bar. Available in two sizes approximately 30” or 18”. Side plates must be purchased separately. Fits all side plates except for Plug-N-Play. Old School sissy bars not designed to hold passengers. Square stock will hold passengers.

• 684063    30“ Attitude Stick, chrome

See Spring Update, page 12